The quality only a BMW specialist can provide

Most lowering springs are made with only one objective in mind – reducing ride height. Concerns like ride quality sadly fall by the wayside. 3DDesign’s lowering springs are different. Street-oriented, we’ve made them specifically to work with the stock dampers, ensuring ride quality is as close to stock as possible. Of course, they’re made in Japan, ensuring the highest quality, and are zinc-coated before being painted, for longer life in snowy areas.

Model Ride height reduction (front) Ride height reduction (rear) Product number Variations
1 Series F40 M135i -20mm -20mm 1221-24011 For M135 onlyt
118d - - in development  
2 Series F44 M235i -20mm -20mm 1221-24011 For M235 onlyt
3 Series G20 M340i MSpo -30mm -30mm 1221-32013 X-Drive models untested
330i MSpo -20mm -20mm 1221-32011 Standard and SE trims:30mm ride height reduction. X-Drive models untested
320i MSpo -20mm -20mm 1221-32011 Standard and SE trims:30mm ride height reduction. X-Drive models untested
320d MSpo -20mm -20mm 1221-32012 Standard and SE trims:30mm ride height reduction. X-Drive models only
G21 M340i -30mm -30mm 1221-32112 For X-Drive
330i MSpo -20mm -20mm 1221-32111 Standard and SE trims:30mm ride height reduction. X-Drive models untested
320i MSpo -20mm -20mm 1221-32111 Standard and SE trims:30mm ride height reduction. X-Drive models untested
320d MSpo -30mm -30mm 1221-32113 X-Drive models untested
4 Series G26 M440i - - in development Standard trims:20mm ride height reduction.
420i MSpo -25mm -25mm 1221-32612  
G22 420i MSpo -20mm -20mm 1221-32211 Standard trims:20mm ride height reduction.
8 Series G15 M850i -20mm -20mm 1221-31511  
G16 M850i -20mm -20mm 1221-31612 for xDrive
840i MSpo -20mm -20mm 1221-31611 Standard trims:20mm ride height reduction.
X2 F39 20i -30mm -30mm 1221-23911 For Xdrive
20d -30mm -30mm 1221-23911 For Xdrive
18d -30mm -30mm 1221-23911 For Xdrive
X3 G01 M40d -30mm -30mm 1221-30112 For Xdrive
20i -30mm -30mm 1221-30111 For Xdrive
20d -30mm -30mm 1221-30111 For Xdrive
Z4 G29 M40i -20mm -20mm 1221-32912
20i -15mm -10mm 1221-32911 No information for Non-M-Sport
M G80 M3 -20mm -10mm 1221-38011 For AT 2WD
  G82 M4 - - in development For AT X-drive
    M4 -25mm -25mm 1221-38211 For AT 2WD
i G26 i4 -15mm -15mm 1221-32613 Air suspension adjuster rods at rear
MINI F54 JCW  -25mm -25mm 1221-25411 For CLUBMAN 4WD
  F56  JCW  - - in development  
* Prices listed do not include taxes and are RRP only.
* Ride height reductions are reference numbers based on 3DDesign’s own development cars, equipped with stock dampers. Actual lowering amount could vary depending on your car’s grade and/or equipment level.
* We do not have strength test analysis documents available for these products